PulseGuard Pulsation-Dampeners.com
Index | Selection / Quotation (What do you need?) | Contact Information

Pulsation Dampeners | Please Phone 910-270-2737 | We have people not voicemail | Call toll free 1-888-326-7377
Fluid Flow Control Animations
Fluid Flow Control Animations

Pulsation Dampener - High Pressure Diaphragm Type / Secondary Containment

FlexOrber High Pressure PTFE Diaphragm Pulsation Dampener
CAUTION: Generally called a "dimensional drawing" this is a PulseGuard viewsheet. The length to diameter ratio(s) are not to the same scale.

The PULSEGUARD Pulsation Dampeners of the FlexOrber series are designed for use where double layer and "sandwich" PTFE diaphragm head metering pumps are required for hermetically sealed toxic, pyrophoric, and hazardous duty.
The flexorber Dampeners match the features of these high pressure chemical pumps. The dampeners also have, secondary containment sealing - see permeation detection port option. Double layer PTFE diaphragmed, see "DW" left of center line.

The pump type with which these dampeners work, suffer inefficiency due to process liquid compressibility at temperature. This phenomenon, according to pump manufacture technical bulletins, produces a velocity jump shock at the commencement of each suction and each discharge stroke. Shock pressure waves in liquid typically travel at 1400 meters per second. Twice the velocity of a bullet. In order to address these shocking pulses they must be caused to enter the dampeners.
To ensure the entry of the pulses, and to isolate the system from them, the Flexorber pulsation dampeners have to at least have an entry and an exit connection. For use with multiple diaphragm pump heads, the piping base blocks, which intercept and prevent pulsation by-passing, may have up to 5 connection. One to each pump head and on to the system.

The dampener multi flow path "in line through flow" piping base blocks ensure constant temperature within the dampeners capsules, helping constant agitation, lack of sedimentation, and flushibility.

Pulsation Dampeners with FlexFlon PTFE Diaphragm Membranes
PTFE Diaphragm Type for Hot and Cold Liquids
High Pressure Diaphragm Type / Secondary Containment
Diaphragm Type / Polished Stainless Wetted Parts
With Non-Metallic or Wetted Parts
Viewsheets by Pump Type:
Diaphragm Metering Pump
Hose Pump
Lobe Pump
Low Pressure Dosing Pump
Diaphragm Metering Pump
Packed Plunger Pump
Progressive Cavity Pump
Vane Pump

Index | Selection / Quotation (What do you need?) | Contact Information

Click on the picture of the damper below to see how it works and is assembled, animated.
HP Liquid in Bladder Pulsation Dampers Gas Bladder Pulse Dampers / Accumulators LP Elastomer Membrane Surge Suppressors LP PTFE Diaphragm Pulse Dampeners HP PTFE Membrane Pulsation Dampeners Sludge Slurry Flexible Tube Dampners Pressure Pulsation Pulse Frequency / Frequencies

Fluid Flow Control Fluid-Flow-Control.com The Fluid Flow Control Source Pumps Accumulators Filters Dampers Heat Exchangers Valves Mixers P.I. / Pressure Indicators Controls Meters Vessels